Building Guard is a water-based high performance water repellent compound. It forms a hydro phobic barrier beneath the surface and seals out moisture while remaining highly vapour permeable. The visual appearance of the treated surfaces will show nominal or no change resulting from product application. The benefits include enhanced resistance to efflorescence, freeze thaw damage, cracking and spalling. Cured system is resistant to ultra violet light and may be used as a sealer for surface coatings.
Dilution: Dilute Max-Aquaseal Buildguard with clean water according to the recommended mixing ratio provided on the product label or technical data sheet. Agitate the solution thoroughly to ensure proper mixing.
Application Method: Apply Max-Aquaseal Buildguard using a low-pressure sprayer, brush, or roller, depending on the size and type of surface. Ensure even coverage and avoid puddling or excessive buildup of the product.
Multiple Coats: For optimal protection, apply multiple coats of Max-Aquaseal Buildguard as recommended, allowing sufficient drying time between coats. Refer to the product label or technical data sheet for specific instructions on the number of coats required.
Drying Time: Allow Max-Aquaseal Buildguard to dry completely between coats and before subjecting the treated surface to foot traffic or other activities. Drying times may vary depending on environmental conditions such as temperature and humidity.
Natural substrate color and surface textures are unaffected, with little to no gloss created.
Penetrates deeply to produce long-lasting protection on vertical or horizontal surfaces.
Effective on most vertical or horizontal exterior, above-grade masonry surface
Any Paint can be applied on the applied surface.
Exhibits good beading effects.
100% water vapour permeable.
Mildew and fungus resistant.
High resistance to alkali attack.
Can be reapplied to treated surfaces.
Alkaline stable-suitable for new "green" concrete.
